Dear Sir,

Enclosed is an ad for tow bars I manufacture.

With other tow hitches, it’s hard to remove the pin when un-hooking. With Tow N’ Stow, you back up before un-hooking, creating pressure. Relieve the pressure with the latch, which makes it easy to un-hook up hill or down. The tow bars have a safety stop to prevent injury. The Brute tow bar features the roller release latch shown in figure C. This latch releases under a tremendous amount of pressure. You can have 2-ton trucks backed against each other and relieve the pressure.

Pins through four shiny eyebolts mount the tow bar to a vehicle, which makes the tow bar easy to remove. The tow bar can be folded flat under the bumper, as in picture B, with the eyebolts on angle irons that mount under the bumper. This is the most concealed method and works well on newer, rounded bumpers. It can be crossways on edge as shown in picture A. It can also be up right in an "A" position. With extra eyebolt kits, you can use the tow bar on several vehicles

The Standard tow bar is available in a ball coupler or clevis hitch.

For more information call: Glenn Solberg @ 701 528 -4712 

or write to: 
13592 77^th St. NW 
Zahl N. D. 
58856